─────阵列式皮带秤─────
  • 阵列式皮带秤

  • 阵列式皮带秤构成图

  • 超常优良的称重精度和长期稳定性。
    现场适应更强,有效抑制皮带张力变化的影响
    传感器温度补偿技术的应用;
    两只称重传感器完全覆盖了不同带宽、不同托辊间距输送机的称重范围;
    简单的棒码、挂码标定和电子标定,使皮带秤的标定变得简单实用;
    适用于贸易结算和比较重要的散装物料计量
    可选的网络功能可实现信息共享和专家系统远程诊断
    40年电子皮带秤研发、制造和服务经验使采购商二次获益。
  • 阵列式皮带秤详情>>
    ─────产品中心─────

    用我们的专业和诚信赢得您的信赖 用我们的技术支持与服务赢得您的放心

    更多>>
    • 新闻资讯
    • 技术手册

    产品推荐

    更多>>
    < >
    • 0
    • 1
    • 2
    皮带跑偏开关- 皮带跑偏开关、拉绳急停开关- {pboot:sort scode=} [sort:name] {/pboot:sort}

    产品中心

    皮带跑偏开关、拉绳急停开关

    首页

    皮带跑偏开关

    发布时间:2025-11-18 22:31:09      点击次数:212

    皮带跑偏开关
    Belt Deviation Switch

    产品概述

            BP-20型皮带跑偏开关也可称为防偏开关,用于检测运输皮带运行过程中发生偏离机架中心线的故障。可有效地防止因输送带跑偏而造成的撒抖、过负载、撕裂皮带、损坏机械等事故的发生。跑偏开关可根据皮带的跑偏状况发出信号,实现自动报警和停机,防止皮带损伤和继续跑偏。皮带跑偏时,皮带推动动作臂偏转,触动微动开关动作,发出报警信号。如果继续偏离到设定的停机位置,触动另一组触点,输送机就

          会保护性停机。可广泛地用于冶金、煤炭、水泥、矿山、电力、粮食等工业领域的各种皮带运输机械中,是物料输送系统安全保护和自动化控制必不可少的检测装置。


    BP20 type can belt deviation switch known as the Antiswitch for detecting the transport belt running occurred during the deviation of the center line of rack failures. Can effectively prevent the conveyor belt as a result of the deviation caused by the spread expected,the load off, tearing belts, mechanical damage, such as accidents.According to Deviation switch belt deviation of the signal status, alarm and automatically ShUt down to prevent damage and to continue to belt deviation. Deviation belt. the belt moves to promote deflection arm, the microswItch trigger action, issued a warning signal. If we continue to deviate from the set position down, touch the other contact group, the conveyor shutdown would be protective.Can be widely used in metallurgy, coal, cement, mining, electricity, food. and other industr'Ial belt in the field of transport machinery,material handling system is to protect the security and automation control devices essential for detection.


    产品特点

    铸铝外壳结构,开关结构牢固,耐冲击力大,经久耐用。

    二段检测报警。可以分别进行皮带一级(轻)、二级(重)跑偏的报警、控制。

    开关内装有2组常开、常闭触点,可同时用于停止皮带运输机及报警。


    Product features

    Cast aluminum shell structure of the solid structure of the switch. impact-resistant. durable.

    2 detection alarm Can separate a belt llightl and secondary (re-l deviation of the police to control

    Group 2 have built-in switch always. often close contact. can be used to stop Belts report to the police and transport planes


    技术参数
    触点容量:AC250V, 5A(感性负载);

    检测角度:一级跑偏检测动作20°,二级跑偏检测动作35°;

    电缆出线孔:3/4"-14NPT(适用外径8-12mm电缆);

    环境温度:-20℃~60℃

    装置重量:约4.0kg
    防护等级:IP67


    Technical parameter

    Contact the capacity of technical parameters: AC250V. 5A (inductive load):

    deteCt10n DOjnt of VleW:a deVlati0n deteCtion aCtion 20°,  the secondaW deviation detection action 35°.

    Cable-hole round:3/4 "-14NPT lapplicable t0 8 - 12mm diameter cablel;

    ambient temperature:-20℃~60℃;

    unIt weight about:4.0kg;

    protecfion rating:ip67


    皮带跑偏开关应用范围:

    常规皮带输送机,包括平皮带输送机和槽形皮带输送机地下、索道支撑皮带输送机

    轮船装卸系统

    平皮带输送机

    堆取料输送机

    起重机,挖掘机起重臂限位


    Application range

    Conventional belt conveyor. including flat belt conveyor and trough belt conveyor

    Underground, cable support belt conveyor

    Ship loading and unloading system

    Flat belt conveyor

    Stacker conveyor

    Excavator boom crane l limit